1.  Identify the parts of the heelloop.

2.  Separate the down tube from the hanger of the footrest or legrest.

3.  Drill a hole slightly bigger then the screw.

4.  Insert the post through the small loop at the end of the heelloop.

5.  Insert the screw through the bottom of the footplate.

6.  Slide the large loop at the end of the heelloop over the end of the down tube.

7.  Bolt the screw into the post of the heelloop.

8.  Tighten the screw with an Allen wrench.

9.  The heelloop is now installed.

10.  Install the down tube back into the hanger.  Repeat this procedure for the other side.